Water Treatments.
Ensure that you pre dissolve the
sanitiser before adding to the spa.
Dose spa with Spa Lithium
Sanitiser. Ensure the cover is off
and the pump running.
Follow dosage and safety
instructions on the container.
Do not use Bromine in your spa as it
will cause damage
Test your water regularly using test strips, follow instructions on container.
If the pH is too HIGH, add pH
decreaser (pH down).
If the pH is too LOW, add alkalinity
increaser (alkalinity up).
Follow dosage and safety
instructions on the containers.
Unbalanced pH can damage your spa
pumps and heaters.
If the Alkalinity is too HIGH, add pH
decreaser (pH down).
If the Alkalinity is too LOW, add
alkalinity increaser (alkalinity up).
Follow dosage and safety
instructions on the containers.
Unbalanced pH can damage your spa
pumps and heaters
Water hardness usually affects those on bore or tank
water supply. As such calcium
increaser and water softener is
NOT included in the start up
kit but can be ordered.
If total hardness reading is too
LOW, add calcium increaser.
If total hardness reading is too
HIGH add water softener.
Follow dosage and safety
instructions on the containers.
Low water hardness can damage your
spa pumps and heater. High water
hardness will create a build-up of scale
Daily Maintenance.
Dose spa with Spa Lithium Sanitiser. Ensure the cover
is off and the pump running.
Follow dosage and safety instructions on the container.
Do not use Bromine in your spa as it will cause damage.
Weekly Maintenance.
A. Dose your spa using Spa Shock.
Follow dosage and safety instructions on the container.
B. Test the water using a test strip – follow instructions
on container. Compare the wet test strip to the back
of the test strip container.
If you are following daily dosage instructions, you can
disregard the FCL reading on the test strips.
C. Adjust pH, alkalinity and total hardness as per step 5
in the quick start guide.
Monthly Maintenance.
Remove and clean your pleated cartridge filters using
Cartridge Cleaner by following the instructions on the container.
6/ 12 monthly Maintenance.
Depending on your bather load, replace the water in your
portable spa (swim spa water should be changed once a
year), by following these instructions:
A. Add Pipe Degreaser to your spa following the
treatment instructions on the container.
B. Drain your spa by following the draining procedure in
your user guide.
C. Restart by following the quick start up guide above.